All products have GS, CE, and EMC certification.
- Yongkang Making Industry and Trade Co.,Ltd
- Phone: +86-579-87387696
- E-mail: email@example.com
- Fax: +86-579-87385729
Read Before using the drywall sander:
1. Ensure that the power supply used is AC 220V. (or 110V, it up to your country)
2. Ensure that the power switch is in the “off” position.
3. Installation and adjustment of the wheel guard: The shield is a protection device that protects people from the trouble when the wheel is broken. It must be properly installed and tightened before use. Loosen the set screw and adjust the cover to The maximum ergonomic angle should be tightened after adjustment.
4, to ensure that the grinding wheel used is the correct model, no cracks and other defects, but also to ensure that the grinding wheel is properly installed and tightened.
5. The test run is to ensure safety. The angle grinder runs for more than one minute before each daily work. After replacing the new grinding wheel, run for more than three minutes to ensure that the grinding wheel is free of defects.