Home > Knowledge > Content
Adjustable handheld laser range finder manufacturing method
- Feb 04, 2019 -

Adjustable handheld laser range finder manufacturing method



At present, the laser range finder is an instrument that uses a laser to accurately measure the distance of a target. The laser range finder emits a very fine laser beam to the target during operation. The photoelectric component receives the laser beam reflected by the target, and the timer measures the time from the transmission to the reception of the laser beam to calculate the distance from the observer to the target.

There is a total of a handheld laser range finder that places the laser emitting objective lens and the laser receiving eyepiece on the folding block. It is necessary to use a range finder to flip the laser emitting objective lens and the laser receiving eyepiece on the folding block. Outside, in use, when the range finder is not used, the flip block is flipped over to the range finder, thereby realizing the protection of the laser emitting objective lens and the laser receiving eyepiece, so that the laser emitting objective lens and the laser receiving eyepiece can be protected. purpose. However, when measuring the height of the slope, it is necessary to separately measure the data at the bottom of the slope and the top of the slope. In this case, the two measurement points are required to be on the same vertical plane. When the user holds the handheld laser range finder for measurement, It is easy to cause the measurement point to shift, making the measurement data inaccurate.


laser distance sensor 5


Related Products